Handlebar risers move back 28 mm

Print
  • RISA28
  • New

Handlebar risers to be applied on the original risers to move back and raise the handlebar for 28 mm

More details

89,00 €

Handlebar risers to be applied on the original risers to move back and raise the handlebar for 28 mm

The 28 mm rearward handlebar risers are made of solid 7075 ergal born from the need of motorcyclists who want to move back and raise the 28 mm handlebar.

The SRT handlebar adjusters that are applied between the original risers and the handlebar raise the HANDLEBAR by a good 26 mm and move it back towards the rider by 20 mm.

The riser to retract the handlebar is compatible with all motorcycles that have risers with aligned screws, they are not compatible, for example, with Multistrada 1200 or Z 750 that have misaligned riser screws.

Universal compatibility is ensured by the type of slot hole on the base, which allows the retractors to be mounted on risers with hole spacing from a minimum of 23 mm to a maximum of 44 mm (always check the size before purchasing them).

Each kit includes 2 setbacks / shims for complete risers + 8 M8 screws for correct assembly.

The technical drawing shows how the handlebar moves.

The SRT riser to retract the handlebar is used in all those cases where greater comfort is desired and the replacement of the handlebar alone is not enough.

This riser is not always the best solution, on most bikes it is not recommended, if you have any doubts ask us for assistance.

risr manubrio arretrati 28 mm

  • Diameter handlebar 28,6 mm
  • Weight 153 gr. a unità

Write a review

Handlebar risers move back 28 mm

Handlebar risers move back 28 mm

Handlebar risers to be applied on the original risers to move back and raise the handlebar for 28 mm