Highly folded SRT motocross handlebar made entirely in ergal 7075 + traversin
The SRT bumper handles are manufactured in Italy, are approved and manufactured with high precision and quality. The handlebar is a structural element of the bike and must be safe.
The high enduro cross SRT + crossbar handle has an outside diameter of 22 mm and is compatible with most 22mm risers, the inner hole is 12 mm and allows the mounting of the handlebar handles and handrails with system To expansion. The weight is only 600 gr. Despite being light it has a very high resistance guaranteed by the ergal 7075 material (you can see the features of the material here).
Beware of the details In the process of implementation, numerical control bending allows you to perfectly replicate the measurements at each production cycle, and then the handlebar is brushed to eliminate the marks of the machine.
In the end it is anodized, this treatment gives the material a colorful and brilliant finish that lasts over time without discoloring even after years of solar exposure.
Anodizing protects the handlebar from weathering and oxidation.
The SRT bike handlebar is available in colors: Red - black - gold - blue - silver - green - orange
Cross stitch: silver
The safety of our motorcycle handlebar
| omologazione|| lavorazioni di precisione|| riduzione vibrazioni trasmesse al pilota|| materiali ad elevata resistenza|| minor peso rispetto al manubrio originale|| high quality standard|
For us, the handlebar is a fundamental and structural element of motion, to which we pay close attention, it must guarantee different parameters, including rigidity and robustness to ensure a safe road safety especially off-road, where the stresses are greater, Example on jumps or in driving steps on the footpaths. For this reason, all our products, and in particular the 22mm motorbike handlebar, are designed and manufactured to meet safety and comfort requirements as well as esthetics.
The advantages of the SRT motocross and enduro handlebar. The 22 mm high cross / enduro bend SRT bender gives your cross, motard or enduro bike a more comfortable ride with better maneuverability. Taking advantage of the greater width than the standard handlebar, it also gives more control of the bike and a correct position even in the standing driving steps.
The addition of the crossbar reduces almost 20% of the vibration and reduces the flexibility, especially in jumps and points of greatest disconnection. The handlebar is supplied without holes for mounting the ignition block and gas control.
At the top of the "technical data" section you can check the dimensions of our motorcycle handlebar.
The length slightly larger than the original original handlebars is such as to improve the leverage effect that allows you to control and drive the bike making it more manoeuvrable and at the same time makes it easy to mount on the bike with a 22mm handlebar without having to replace the cables.
But on my bike this handlebar mounts?
The 22 mm SRT handlebars are compatible with all 22mm risers.
- The diameter:
The brake knobs, brake pumps, electric locks and all components mounted on the original handlebars of the bike are compatible since they all have a standard 22 mm diameter. The handlebar is supplied without holes for mounting the ignition block and gas control.
- Dimensions: To choose the right bend you have to check the measurements. In the "technical tab" section on this page you will find the measurements, such as width and height.
Check to understand which handlebar is best suited to your needs.
The SRT 22mm motocross / enduro / motard handlebar can be mounted for example on:
Transalp 600 / 650 / 700
CRF 250 / 450
XR 600 / 650
AfricaTwin 750 / 1000
SM 610 / 630
SM 125 / 250 / 450
Te 125 / 250 / 310 / 450
KX-F 250 450
Exc 125 / 250 / 450
Drz 400 / 650
Rm-z 250 / 450
YZ-F 250 / 450
XT 600 / 660
Tenere 600 / 660
SuperTenere 750 / 1200