Handlebar for Talaria variable section SRT 

The Talaria Sting is a very fun bike, but it comes standard with a bad handlebar.

The main flaw concerns the shape and the type of fastening. The standard handlebar comes from the world of bikes, like almost all Talaria components.

A short ride is enough to understand that it is unsuitable in every sense, both in terms of riding position and shape.

We have therefore developed a perfect riser + handlebar kit for riding the Talaria.

The central single riser has been replaced by 2 real risers, like those on motorcycles, which are fixed to the stock plate of the Talaria, without modifications.

This step is very important, because it noticeably improves the quality and steering precision.

From here you mount a handlebar that is fully compatible with the Talaria 4000 components, including the instrumentation, and with an ideal shape and size for off-road riding and for the use for which the Talaria was born.

Right from the start you will find a more comfortable and natural posture, straighter in standing and off-road riding.

You will have greater steering solidity, more precision and more control.

You can say goodbye to wrist pain and fatigue from intense off-road driving, which the standard Talaria handlebar creates after a few tens of minutes of use.

The SRT handlebar is designed for riding "normal" bikes and on the Talaria its characteristics are enhanced even more by the extremely light bike.

Another advantage is its robustness. It resists falls of all kinds on traditional moots, on the Talaria so it becomes impossible to fold it. Being a handlebar designed for motorcycles and not for bikes, it actually translates into an incredible advantage that allows you to always go home, no matter what.

On the other hand, this type of system, being more robust, also has a few more grams. This setup weighs about 300 gr more than the standard one.

But the ride benefits more than make up for it.

On the SRT handlebar for Talaria you can always mount the original components and accessories such as handguards, mirrors, etc.

What the kit includes

The kit for the Talaria is made up of the SRT Factory handlebar designed for off-road use, with shape and dimensions that help when riding upright and allow you to tire your wrists and arms less, increasing your "autonomy" on the Talaria.

The specific risers for the stock plate, which bolt directly without modifications. They significantly increase the driving accuracy of the Talaria.

The adapters for the original instrumentation, which will be fixed on the new handlebar.

Every other original Talaria component (throttle control, light switch, handlebar end mirrors, hand guards, etc.) is compatible with the SRT factory handlebar and with the kit in question.

Attention to detail

In the manufacturing phase, the numerical control bending allows to perfectly replicate the measurements at each production cycle, subsequently the handlebar is brushed to eliminate the signs of the machinery.

Finally it is anodized, this chemical treatment of the SRT handlebars gives the metal a colorful and bright finish which, unlike painting, lasts over time without discolouring even after years of sun exposure.

The anodizing we perform will protect your handlebar from atmospheric agents and oxidation for many years.

The safety of our motorcycle handlebar

precision machining

reduction of vibrations transmitted to the pilot

high strength materials

less weight than the original handlebar

high quality standards

For us, the handlebar is a fundamental and structural element of the bike, to which we pay the utmost attention.

It must pass several parameters to be an SRT handlebar, including stiffness and strength to ensure driving in constant safety, especially off-road, where the stresses are greater, such as on jumps or when riding standing on the footpegs.

For this reason, all our  22-28mm  variable section handlebars for motorcycles are designed and manufactured taking into account safety needs as well as comfort and aesthetics.

The advantages of the 22/28mm variable section SRT handlebar for off-road

Are you still undecided?

If you still have doubts find out why you should  CHOOSE A SRT FACTORY HANDLEBAR  and why our handlebar is the only one that definitively solves motorcyclists' driving problems.